STEP 1
Installation CD

1. Locate the CD-ROM labeled ‘Vision Net V.I.P. Quick Installer’.

2. Make sure no programs are running on your computer, and insert CD-ROM into your CD-Rom drive on your computer.

3. CD-ROM should auto-run and display a blue installation program screen over your desktop. If your computer does not auto-run the CD-ROM, go to ‘My Computer’ and double-click your CD-ROM icon.

4. Click the button at the bottom-right that says ‘Start’. This will start the step by step wiring and installation.

5. Click ‘Next’.

6. This page is a description of what the CD-ROM will do. Click ‘Next’.

7. This page will give you the choice of either an ENET or USB connection from the DSL modem to the computer.

STEP 1a -- ENET installation

8. Click the button labeled ‘Click here to qualify’. This will run another application called ‘Qualifier’.

9. Click ‘Next’. This will start the qualifying process.

10. If any of the steps fail, please leave the screen open and contact Technical Support (866-764-8485 option 2). If all steps were passed successfully, click ‘Next’.

11. Click ‘Next’.

12. This screen will display all Ethernet network cards that you have installed on your computer. Please choose the one you wish to connect to the DSL modem with, and click ‘Next’.

13. You will see a pop-up window, letting you know that it will be changing your network settings for that Ethernet network card. Click ‘Yes’.

14. You might see another pop-up window explaining that you will have to restart after the end of the installation. Click ‘Ok.’

15. You will be taken back to the blue installation screen once again. Please read the filter information carefully, as it is extremely important for your DSL’s reliability. Click ‘Next’.

16. Read screen, and click ‘Next’.

17. This screen explains how to plug the DSL modem into the phone jack in the wall, and how to plug in your phone if it must use the same phone jack. This install disc does not speak about the surge protector, however, you will need to put it between the DSL modem and the phone jack in the wall. Please read screen carefully, and click ‘Next’.

18. This screen explains how to put the in-line DSL filters on all of your telephones in the home. Please read carefully, and click ‘Next’.

19. This screen will instruct you on plugging the DSL modem into your computer via the ENET cable. Please read carefully, click ‘Next’.

20. This screen instructs how to plug in the PWR adapter for the DSL modem. Though this install disc does not speak about the surge protector, please make sure to plug in the DSL modem’s PWR adapter into the front of the surge protector. Read carefully and click ‘Next’.

21. Please read screen carefully and click ‘Next’.

22. This screen will install an Internet web browser in case you need one for your computer. Windows operating systems already have Internet Explorer. You do NOT need to install either of these programs. This is completely optional. Click ‘Skip’.

23. This screen will setup email in Outlook Express. If you do not wish to use Outlook Express as your email program, you do NOT have to setup your email in this program. Click ‘Skip’.

24. This is the end of the installation, please read carefully, and click ‘Finish’. You will see a pop-up screen asking you if you would like to restart now or not. The installation will not complete until the computer is rebooted. You do NOT have to reboot immediately after the installation. Click either ‘Yes’ or ‘No’.