Dial
up setup on a Windows NT operating
system Step
1: Check to make sure Dial-Up Networking/Remote
Access is installed. Dial-Up Networking/Remote Access is the component
that Windows NT uses to access your modem.
Without Dial-Up Networking/Remote Access, you
will not be able to dial out from your modem. 1. From the desktop, double-click the My Computer
icon. 2. Double-click on the Dial-up Networking
icon. If Dial-Up Networking/ Remote Access
in not installed, you will be prompted to copy
files from your Windows NT source CD. After
the files have been copied, you will be prompted
to reboot your computer. Step 2: Creating the Bluemarble Connection. 1. From the desktop, double-click the My Computer
icon. Double-click on the Dial-up Networking
icon. 2. When the Dial-up Networking window opens,
click on New.
3.
You should now see the first screen of the
New Phonebook Entry Wizard. Enter BlueMarble
in the Name the new phonebook entry box. Make
sure there is a checkmark next to the "I
know all about phonebook entries and would
rather
edit the properties directly" option. (This
option allows you to edit your phonebook entries
manually.) Click Finish.
4. A window will appear with five tabs at
the top. Click on the Basic tab. Enter the
telephone number given on your Start Here sheet
in the Phone number box. If you cannot find your dial-up telephone
number on your Start Here sheet, please select
the appropriate number from the following chart.
| 323/ 33X/ 349/ 353 |
|
935-1000 |
| 355/ 855/ 856/ 857 |
|
935-1000 |
| 961 |
|
935-1000 |
| 659 |
|
658-1000 |
| 824 |
|
823-1000 |
| 825 |
|
826-1000 |
| 828/ 829 |
|
935-1000 |
| 837 |
|
823-1000 |
| 863 |
|
862-1000 |
| 876/ 935 |
|
935-1000 |
| 879 |
|
935-1000 |
| 936 |
|
938-1000 |
5. At the top of the window, Click on the
Server tab. The Dial-Up server type needs to
be set to PPP: Windows NT, Windows 95 Plus,
Internet.
In the Network protocols section make sure
there is no check in front of NetBEUI and IPX/SPX
compatible, and that there is a check in front
of TCP/IP.
Make sure the Enable software compression
and Enable PPP LCP extensions options are checked.
6. Click on the TCP/IP Settings button. When
the TCP/IP Settings windows appears, make sure
the Server assigned IP address is selected.
Next, select Specify name server addresses
and enter the primary and secondary DNS numbers
on your Start Here sheet. In every location
the DNS numbers are following:
7. When you have entered these numbers in
the appropriate boxes, click OK.
8. Click on the Script tab. Make sure that
the login setting is set to None.
9. Click on the Security tab. Make sure that
"Accept any authentication including
clear text" is checked.
10. Click on the X.25 tab. The Network drop
down menu should be set to None. Make sure
that all other boxes are empty. Then click
OK.
11. You should return to the Dial-up Networking
window. Make sure that BlueMarble is selected
in the Phonebook entry box, and click Dial. 12. After you click Dial, the Connect to BlueMarble
window should appear. Enter your username,
in all lower case, and then enter the password,
again using proper case. Leave the domain field
blank. Click OK. You should now be connected to BlueMarble.net. 
|
